Crush different kinds of stones or ores, it needs different jaw crusher tooth types to suit. There are some popular jaw plate tooth profiles and uses.
Standard Tooth
It is suitable for both rock and gravel crushing; Wear life, power requirements, and crushing stresses in good balance; Typical factory installation.
Quarry Tooth
Suitable for crushing Shot Rock in quarries; The flat teeth perform better with abrasive materials; (more wearable tooth material); Cause higher stresses and increase power requirements.
Super Tooth
Suitable for general use and especially a good choice for gravel crushing; the large mass and special design of the teeth gives long wear life and allows fine material flow down through the cavity along the grooves without wearing the teeth.
Corrugated Recycling Tooth
Suitable for crushing concrete; Fine material flows easily through the cavity along the large grooves.
Wavy Recycling Tooth
Suitable for crushing Asphalt, Material flows easily down through the cavity along the grooves without packing; Normally used in the small setting range with the intermediate plate.
Super Grip Tooth
Suitable for hard and round natural rock crushing; Provides better grip and capacity; Fine material flows easily through the cavity along the large grooves; Wear life of the fixed and movable jaw dies in good balance.
Wedge & Standard Tooth
Suitable for both rock and gravel crushing; Thicker lower end of the jaw die and the thinner upper end of the jaw die; Maximizes size of the maximum feed size of the cavity with the maximum nip angle; Wedge jaw die is the fixed one and the Standard jaw die is the movable one.
Anti Slab Tooth
Special jaws designed to crush slabby sedimentary rock; Can also be used when recycling concrete and asphalt slabs.
TIC Inserts Tooth
Special jaws designed to crush hard rock; Can also be used when recycling concrete, asphalt slabs, and the mining industry.
Post time: Aug-24-2023