As the primary component of crushing equipment, the jaw crushing equipment holds a pivotal position among all crushing devices. When using jaw crushers, sudden shutdowns are often encountered. If the cause of the shutdown cannot be identified in time and repaired promptly, it will cause significant losses to the entire project. It will not only affect production but also reduce production efficiency. So, why does the jaw roller suddenly stop working during operation? In the face of this situation, how should one respond?
1. Cut off the power supply
Immediately turn off the power switch of the jaw crusher to prevent injury caused by accidental start-up.
2. Check the circuit
Check if there are any problems such as short circuits or open circuits in the circuit. If there are any issues, please have them repaired by professionals.
3. Inspect the crushing chamber
Check whether there are any obstructions in the crushing cavity, such as stones or iron blocks. If so, they should be removed in time.
4. Check the drive belt
Check whether the drive belt is broken or slipping. If there is a problem, replace or adjust it.
5. Check the lubrication system
Check whether the lubrication system is working properly. If the lubricating oil is insufficient, it should be added in time.
6. Contact maintenance personnel
If the cause still cannot be identified after the above checks, professional maintenance personnel should be contacted for inspection and repair.
7. Ensure safety
Do not attempt to start the jaw crusher before the fault is eliminated to ensure personal and equipment safety.
Post time: Aug-11-2025